Page 2 of 2 FirstFirst 12
Results 21 to 29 of 29

Thread: no effect from PT-141

  1. #21 2nd October 2017 
    cdl2's Avatar
    Join Date
    Sep 2017
    Location
    Ohio
    Posts
    18
    Thanks
    6
    Thanked 0 Times in 0 Posts
    From what I've read here, I need to suck out some air from the PT141 container with a syringe & then put that air in the Bac water.
    Then suck out some Bac water & inject that into the PT141 container, until its full.
    Keep the mixture refrigerated.
  2. #22 2nd October 2017 
    Ndc27's Avatar
    Join Date
    Sep 2016
    Posts
    17
    Thanks
    1
    Thanked 6 Times in 6 Posts
    Quote Originally Posted by cdl2 View Post
    From what I've read here, I need to suck out some air from the PT141 container with a syringe & then put that air in the Bac water.
    Then suck out some Bac water & inject that into the PT141 container, until its full.
    Keep the mixture refrigerated.
    You shouldn't be able to suck any air out of your pt141 container, as it should be vacuum sealed. How much bac water to add is just a matter of personal preference, but filling the container is way too much IMO.
    I do agree with one thing...keep the mixture refrigerated!
  3. The Following User Says Thank You to Ndc27 For This Useful Post:

    cdl2 (2nd October 2017)

  4. #23 2nd October 2017 
    cdl2's Avatar
    Join Date
    Sep 2017
    Location
    Ohio
    Posts
    18
    Thanks
    6
    Thanked 0 Times in 0 Posts
    My PT141 container is 10mg.
    How much bac water would you add to that?
    I need to find some Bac water too.
  5. #24 4th October 2017 
    carl2's Avatar
    Join Date
    Sep 2017
    Posts
    11
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Is this for injection or inhaling?
  6. #25 4th October 2017 
    Ndc27's Avatar
    Join Date
    Sep 2016
    Posts
    17
    Thanks
    1
    Thanked 6 Times in 6 Posts
    Quote Originally Posted by cdl2 View Post
    My PT141 container is 10mg.
    How much bac water would you add to that?
    I need to find some Bac water too.
    Bac water is easily available online for about $5.

    I would start with 1cc, or 2cc, and then dose 1/10 of that amount.
  7. #26 4th October 2017 
    Ndc27's Avatar
    Join Date
    Sep 2016
    Posts
    17
    Thanks
    1
    Thanked 6 Times in 6 Posts
    Quote Originally Posted by carl2 View Post
    Is this for injection or inhaling?
    Most people inject. Inhaling requires more product, and comes with worse side effects.
  8. #27 5th October 2017 
    cdl2's Avatar
    Join Date
    Sep 2017
    Location
    Ohio
    Posts
    18
    Thanks
    6
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by Ndc27 View Post
    Bac water is easily available online for about $5.

    I would start with 1cc, or 2cc, and then dose 1/10 of that amount.


    I'm having bad luck finding syringes.
    I do have a couple that are in plastic wrappers from years ago.........my dog was allergic to the cat, had to give the dog shots.......LOL
  9. #28 6th November 2017 
    MBS12's Avatar
    Join Date
    Nov 2017
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Hi there. I’m new to the forum and pt141.
    After quite a bit of research I bought my first bottle late Sept. It came with 2ml of bac water. The instructions said to mix 2ml with the 10mg which I did carefully. So I followed the advice of many on the net and started with 0.25mg. Metallic taste, flushed in the face and a bit queasy but that was it. 5 days later I upped the Dose to 1mg. Same side effects and that’s all. 10 days later upped to 2mg. Same side effects and a very slight tingling of arousal. Nothing much really. Hubby was very horny so I gave in and it wasn’t unpleasant. 6 days later upped to 3mg. Nothing.

    I received my 2nd bottle today. Mixed only 1ml water with pt and injected 1mg. 4 hours later less than nothing. Decided to inject another 2mg, 10 minutes ago. Let’s see what happens now.

    Is the product bad or am I that 1% that it just does not affect? Should I try something else ? What? Pls help? ( there seem to be only one supplier in my country where I can get this from. So might have to order from the states next time it seems )
  10. #29 1st December 2017 
    PeptideOzzie's Avatar
    Join Date
    Dec 2017
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    One thing I have noticed nobody is mentioning here is that from what my hormone doctor informed me: For PT-141 to work (in fact most peptides for that matter) you need to fast 2 hours before injections and also one hour after. The reason I was told is due to the insulin spike from food. It will reduce or annihilate the efficacy of the peptide if it is sensitive to insulin in the blood stream. In this case PT-141 is sensitive to it and if you are eating/drinking within that window period then you could be wasting your money.

    So before you claim that the batch you ordered is bunk or that PT-141 just does not work for you, I suggest following the simple fasting rule before you conclude anything else.

    Also, PT-141 should be refrigerated both before it is constituted with water and definitely after because once the peptide has been constituted its half life reduces drastically - apparently. I say apparently because I have had constituted PT-141 kept in the fridge for months and it still was effective. Advice I was given was not to freeze the peptide because freezing damages the fragile structure of the peptide.

    Comments about bacteriostatic water - bacteriostatic water is expensive but of course the best. Alternatively I use sterile water vials which I have been advised are okay as well but of course not as good as BAC water for maintaining the sterile integrity of the contents. But I have never had a problem.

    Also I have been told, but there is some varying opinion, about being careful injecting the water into the vial. There is opinion that you need to inject it very slowly and very gently swirl the water so the peptide is not damaged because it is so fragile. Squirting it in fast may be a cause for destroying a good part of it.

    I have had mixed onset times with PT-141. When I first used it I had random and intense erections within a few hours before it hibernated to come back hours later at night. I have tried injection times. 5pm was okay for a while but I was getting delayed response after - 3 or 4am.

    So probably need to push back to early afternoon for convenience and timing. But everyone is different. I think it may have to do with several factors.

    Someone mentioned being on anabolics (testosterone) and having delayed reaction. I would definitely agree with that as I have experienced the same. In fact I was on a full cycle of Deca, Sus and testosterone for 12 weeks and it got to the stage where PT-141 just stopped working at one point as well as Viagra. Definitely a hormone imbalance issue there.

    Stacking Viagra/Cialis/Levitra with PT-141 is okay IMO as I have done this with great success when my hormone levels had stabilised.

    Definitely if your PT-141 gives you nausea and face flushing then that is a good sign the peptide is working. In fact if you don't get those side effects then the batch you have is likely bunk or you have done something else - like eaten too much food/sugar drink etc causing insulin spike.

    The long term side effects of Bremelanotide aka PT-141 are darkening freckles and moles - sometimes you may feel it has created new freckles but it has not - it will darken all of them so one's that have faded and not clearly visible will pop up as dark brown. You can also develop a tan. These are sides that I get. But the great thing is that you can stop PT-141 for a while and eventually your skin will return to normal. The melatonin subsides.

    If you are drinking alcohol then you need to bear in mind the side effects of alcohol with inhibiting libido/erections. This is counter productive but mostly the PT-141 and perhaps a vasodilator like Viagra will overpower any negative effects of alcohol.

    This information is of course all in my own opinion and I do not profess to be an expert at all and do not give advice. You can just take it or leave it but I am not responsible!!!
    Last edited by PeptideOzzie; 1st December 2017 at 01:00 PM. Reason: Add further information about peptide fragility

Similar Threads

  1. THC effect on GH
    By Jim in forum Bodybuilding Peptides
    Replies: 21
    Last Post: 20th January 2016, 11:01 PM
  2. effect on cellulite
    By jenniefallon84 in forum Melanotan Forum
    Replies: 1
    Last Post: 6th May 2015, 11:39 AM
  3. Another side effect.
    By sobol in forum Melanotan Forum
    Replies: 3
    Last Post: 4th April 2015, 03:11 PM
  4. No effect, please help
    By melanotano in forum Melanotan Forum
    Replies: 3
    Last Post: 25th June 2014, 10:14 PM

Tags for this Thread